Technical Parameters
90 mm 190 mm 43 mm ≈121.15 mm ≈163.9 mm min.3 mm P6 and tighter width tolerance min.104 mm max.176 mm max.2.5 mm SKF Explorer 151 kN 108 kN 3.8 kN 7 500 r/min 4 800 r/min 0.03 13.3 25 µm 50 µm Normal
Dimensions
d Bore diameter tΔdmp -0.015 – 0 mm Deviation limits of mid-range bore diameter D Outside diameter tΔDmp -0.02 – 0 mm Deviation limits of mid-range outside diameter B Width tΔBs -0.1 – 0 mm Deviation limits of ring width d1 Shoulder diameter D2 Recess diameter r1,2 Chamfer dimension ISO tolerance class for dimensions 
Abutment dimensions
da Diameter of shaft abutment Da Diameter of housing abutment ra Radius of shaft or housing fillet Calculation data
SKF performance class Basic dynamic load rating C Basic static load rating C0 Fatigue load limit Pu Reference speed Limiting speed Minimum load factor kr Calculation factor f0 Tolerances of run-out
Range of section height at inner ring of assembled bearing tKia Range of section height at outer ring of assembled bearing tKea ISO tolerance class for geometrical tolerances
Tolerances and clearances
General bearing specifications
Tolerances: Normal (metric), P6, P5, Normal (inch)
Radial internal clearance: Classes C2 to C5
Bearing interfaces
Seat tolerances for standard conditions
Tolerances and resultant fits
Our factory
Warehouse
Warehouse
Warehouse
Warehouse
Products Description
Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
