Technical Parameters
45 mm 100 mm 27.25 mm ≈70.2 mm 25 mm 22 mm min.2 mm min.1.5 mm 20.75 mm max.59 mm min.55 mm min.86 mm max.92 mm min.92 mm min.3 mm min.5 mm max.2 mm max.1.5 mm SKF Explorer 132 kN 120 kN 14.3 kN 5 600 r/min 7 000 r/min 0.35 1.7 0.9
Dimensions
d Bore diameter D Outside diameter T Total width d1 Shoulder diameter of inner ring B Width of inner ring C Width of outer ring r1,2 Chamfer dimension of inner ring r3,4 Chamfer dimension of outer ring a Distance side face to pressure point 
Abutment dimensions
da Diameter of shaft abutment db Diameter of shaft abutment Da Diameter of housing abutment Da Diameter of housing abutment Db Diameter of housing abutment Ca Minimum width of space required in housing on large side face Cb Minimum width of space required in housing on small side face ra Radius of shaft fillet rb Radius of housing fillet Calculation data
SKF performance class Basic dynamic load rating C Basic static load rating C0 Fatigue load limit Pu Reference speed Limiting speed Limiting value e Calculation factor Y Calculation factor Y0
Tolerances and clearances
General bearing specifications
Tolerances:
metric bearings: Normal and CL7C, CLN
inch bearings: Normal and CL, deviating width
Bearing interfaces
Seat tolerances for standard conditions
Tolerances and resultant fit
Our factory
Warehouse
Warehouse
Warehouse
Warehouse
Products Description
Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring. These separable and interchangeable components facilitate mounting, dismounting and maintenance. By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.
High radial and axial load carrying capacity
Accommodate axial loads in one direction
Low friction and long service life
Separable and interchangeable components
